Wearing a series of clear, removable aligners is part of the Invisalign treatment, which gradually straightens teeth. Invisalign treatment Floyds Knobs IN can help with a number of dental disorders, including mild to moderate bite difficulties, crowding, and spacing. Every aligner is made to move particular teeth at a precise force and time. Regular check-ups with the orthodontist or dentist and aligner modifications every few weeks are necessary for the treatment. Don’t forget to seek the opinion of a dental expert for particular guidance and to verify information relevant to your case.
The Treatment Process
For diagnostic purposes, Invisalign treatment Floyds Knobs IN x-rays and photos are taken before the patient’s bite, teeth, and gums are recorded using a bite register, polyvinyl siloxane imprints, or an intraoral digital scanner. With advancements in digital scanning technology in recent years, the latter approach has seen a significant surge in popularity. The orthodontist/dentist completes a written evaluation including the diagnosis and proposed course of treatment.
To generate a computerized three-dimensional model of the teeth, dental imprints are scanned. Using the program Treat, which generates the steps between the existing and desired tooth locations, technicians relocate the teeth to the desired location. For the first set of aligners, anywhere between six and eighty aligners may be required. Every aligner shifts teeth.25–33 millimeters. Clear aligners don’t usually permit full movement in the first round, therefore several aligner rounds—referred to as “Refinements”—might be required to attain desired tooth positions.
Before aligners are made, the patient and doctor are given a computer graphic depiction of the anticipated tooth movements, made using the Clin Check software, for approval or alteration. Computer-aided design and computer-aided manufacturing, or CAD/CAM, software is used to model the aligners, and stereolithography is a rapid prototyping method used in their production. Using a photosensitive liquid resin that solidifies into a hard plastic when exposed to a laser, the aligner molds are constructed layer by layer. The teeth are forced into the aligner’s position by the elastic thermoplastic material used to make the aligners.
A tiny composite attachment that matches the patient’s tooth may be bonded to some teeth in order to rotate or extract a tooth. Sometimes the flexibility of the materials needs to be compensated in the places that require movement since the form-fitting plastic used in clear aligners is less stiff than the metal used in traditional braces.
As an alternative, attachments can be employed to reshape the tooth to allow for easier movement. Increased attachments may detract from the aligners’ visual appeal. In order to improve fit, interproximal reduction (IPR), sometimes known as reproximation or, more jokingly, filing or drilling, is occasionally utilized at the points where teeth meet.
For one to two weeks, each aligner is meant to be worn for an ideal 22 hours each day. The length of the therapy depends on how intricate the anticipated tooth motions are, but it usually takes 13.5 months. When eating, brushing, and flossing, the aligner is taken out. Since clear aligners are composed of plastic, heated liquids may distort them. Hot beverage consumption should be minimized throughout treatment to preserve the aligners’ form and prevent discoloration. The patient is recommended to wear a retainer at night for the foreseeable future after the treatment time has ended.
https://www.knobsfamilydental.com/orthodontic-dental-treatment-services
